RTSP sending and receiving multi-screen simultaneous display tutorial

RTSP sending and receiving multi-screen simultaneous display tutorial

As introduced in the article “RTSP sending and receiving Multi-screen Simultaneous Display Plan supports 16 Screens”. Through the RTSP sending and receiving multi-screen simultaneous Display of AWIND machine wireless presentation system, we can display the wireless screen of mobile phones, pads, laptops and computersn.

Note: AWIND A-100 model only supports 8, A-200 and above model is 16.

one-to-many screen-casting

RTSP sending and receiving multi-screen simultaneous display introduction

Linux hosts support RTSP codec functionality starting with V4.5.0p /E. AWIND wireless presentation system is based on Linux architecture and the development of wireless projection. The RTSP codec features can be used in a variety of scenarios, such as live streaming, conferences, training, education, exhibition halls, and medical care.

RTSP sending and receiving multi-screen simultaneous display run

Note: RTSP address cannot be modified, users can only choose to enable or disable (check or uncheck).

Enable RTSP encoder function through AWIND wireless presentation system background, the WEB settings are shown in the figure below. Select RTSP multi-screen multi-screen simultaneous display settings, then select enable, RTSP address cannot be changed, finally click save, the main machine will automatically restart to complete the setting.

Awind  wireless presentation system back into the way: when phones, computers and wireless device in the same LAN, open the browser, enter the IP address of the wireless voting screen objects bottom label- enter the initial account password (admin) (12345678) – Settings – screen to show more Settings – on the screen to show more TX/RX columns — we can see a list box, select check (open) the default is closed – save and exit – restart equipment (be sure to restart your device, or set doesn’t work).

After successful setting, the words Multishow: Senderrtsp will be displayed in the upper left corner of the screen.

Note: RTSP address has two, one coming from wireless hotspot, address by default: RTSP: / / 192.168.118.1 / live; The other is sent from the wired port or wireless card, and the address is: RTSP ://X.X.X.X/ Live (X.X.X.X is the IP address of the host wired port or wireless card, which can be seen in the upper left corner of the screen).

16 phones, pads, laptops and computers receiving

Receiver setting: In the same LAN, open the VLC player for phones, pads, laptops and computers, and enter our RTSP address on the screen. At this time, the screen of our projection sender device appears on multiple receiver devices.

Again: RTSP transceiver multi-screen wireless presentation system requires that the transmitter device, AWIND wireless presentation host and receiver devices be in the same LAN.

Note: RTSP address cannot be modified, users can only choose to enable or disable (check or uncheck).

Enable RTSP encoder function through AWIND wireless presentation system background, the WEB settings are shown in the figure below. Select RTSP multi-screen multi-screen simultaneous display settings, then select enable, RTSP address cannot be changed, finally click save, the main machine will automatically restart to complete the setting.

Quick Links

    Contact Us