How do I mirror my screen on a network?

How do I mirror my screen on a network?

The prerequisite for mobile phones, computers, etc., to use wireless screen mirroring on TVs and large LED screens is to be on the same network. Using a wireless screen mirror to wirelessly project small screens such as mobile phones, tablets, and computers on large screens such as LEDs and projectors is a common method in meeting rooms.

How do I mirror my screen on a network

How do I mirror my screen on a network?

Using AWIND wireless screen mirroring device, computer screen mirroring LED large screen tutorial [Because each company’s products are different, here is an example of odd machines]

First of all:

Connect the wireless screen mirroring and the large LED screen via HDMI cable [on the signal input interface of the LED, a general LED screen has two HDMI interfaces, one in and one out];

Then:

Connect the wireless screen mirroring device to the Internet cable, or connect the wireless screen mirroring device to the company WIFI, so that the computer and the wireless screen mirroring device are in the same local area network [If you use the USB button to send the screen, this step can be omitted; If a software APP is used as the sender, it must be done];

Finally:

plug in the USB button on the computer, after the indicator light is on, press the button to project the computer screen on the LED screen; or download the software APP supporting the wireless screen mirroring device on the computer to cast the screen-download, Install-start the APP-select the wireless screen mirror ID.

The above is our common way to project the computer screen to the large LED screen through a wireless screen mirror. The projection distance between the USB button of the wireless screen mirror and the receiving box is between 15-30 meters, but sometimes our computer What to do if it is far away from the large LED display?

The same network ultra-long distance computer projection LED large screen

How do I mirror my screen on a network

Computer screen mirroring LED large screen

The so-called ultra-long-distance computer screen mirroring LED large screen on the same network is to plug the wireless screen projector into the Internet cable, and the computer also plugs the Internet cable into the screen through APP or the built-in USB key bridge to enter the LAN, thereby getting rid of the limitation of the screen projection distance.

1. The most common mode-the computer and the wireless screen mirroring device are connected to the Internet, so that the computer and the wireless screen mirroring device are in the same local area network, and then the computer is used to project the screen through the APP. This is easy to understand, so I won’t introduce it in detail.

2. The built-in bridge of the wireless projector and USB or HDMI buttons into the LAN.

Computer screen mirroring LED large screen

First: Insert the USB key into the receiving box of the wireless screen mirroring device, and connect it to the router via a network cable;

Then: mobile phone or computer, assign a static IP address on the router;

Then: the mobile phone or computer enters the management background of the wireless screen mirrorer, replaces the original default DHCP address with the static IP address assigned by the router, saves and exits;

Finally: after assigning the IP address, wait for more than ten seconds [the receiving end and the sending end of the wireless screen projector need to be paired again], after the indicator light of the USB button is always on, we can plug it into the computer, As long as the receiver box of the wireless screen mirroring device is connected to the router through a network cable, the computer can project the large LED screen through the LAN, and there is also no limitation of distance.

Quick Links

    Contact Us